Robotics Education & Competition Foundation
Online Challenges

VEX Robotics Competition "Make It Real" CAD Engineering Challenge Sponsored by Autodesk®

Have you ever wanted a component for your robot that was not included in the kit of parts? Do you want to design and make something unique that sets you apart from your peers? Then the “Make It Real CAD Engineering Challenge” is for you! Autodesk is sponsoring this challenge and giving you a chance to focus your passion for CAD and apply your skills to solve a real-world design issue.

In this challenge, you will use the same Autodesk 3D design software used by professionals to conceptualize and model a new part for a robot that improves its functionality or overcomes an existing problem. The new part must be designed to fit an existing robot and may consist of multiple pieces that form one part design. The robot may be a competition robot (VEX, FIRST, BEST, PLTW, SkillsUSA, TSA, etc.) or another robot that performs an interesting task. Note that your 3D printed part from this online challenge may be used in the VEX U competition, but not in VRC.

To help you succeed, access to Autodesk software is available at no charge to students. In the Make It Real CAD Engineering Challenge, you must use either Autodesk® Fusion 360™, Autodesk® Inventor®, or Tinkercad™ to model your custom robot part. Whether you’ve used the software before or are brand new to CAD, the Autodesk Design Academy provides lessons and video tutorials for all skill levels.

To get started, carefully read the complete challenge requirements on this page. Then visit the Autodesk Design Academy challenge page to download software, watch tutorials and learn how to create custom parts. When you’re ready, return to this page to submit your entry.

The future is yours to design, and we can’t wait to see how you change the world!

Entries

84 Tooth Carrier Gear

bmillar

 

 

Custom made planetary gear system allows for three different
gear ratios and one mechanism, although you could add more mechanisms and ratios.

Read more

1:1 Motor Cartridge

ameador

We designed the 1:1 motor cartridge for the purpose of simplifying the high-speed mechanisms which often end up being used in VRC robots. New teams tend to struggle when they build their first flywheel and may refrain from ever building a high-speed mechanism again, closing the door for a valuable learning opportunity. The impact of friction, the pain of designing multistage gear trains, and the restriction of parts prevents teams from exploring designs that utilize high speeds in order to be effective. This simple cartridge provides a simple solution to these problems.

The 1:1...



91A 45 Degree C-Channel Coupler

Max Johnson91A

        For the 2020/21 Vex Robotics Competition, my team and I decided to make an X-Holonomic drive train for all of the benefits that come with that design. The issue that most teams come upon is finding the best approach to constructing a holonomic due to the currently available hardware that Vex offers which is primarily limited to the 45-degree gusset. 

        To solve this issue, we designed and printed the 45 Degree C-Channel Coupler. This piece is based on the same design characteristics of the C-Channel Coupler where it will...


Rubber Band Spacer

wyattgreenie

This challenge I have decided to make a spacer that can be used to hold a rubber band in place until A motor is moved. When moved the rubberband is released. 

Team Number: 7983Y

Read more

Custom Flex Wheel Inserts

ashatoolsidas

After hearing that Flex Wheels would be legal in VRC this year, we were excited to test them on our Change Up intakes. However, after receiving the wheels, we noticed a lot of setbacks, especially with the Versa Hub, which serves as an insert for axles. The main problem is that the large size of the Versa Hub restricts the areas of the wheel that compress, thus massively reducing the wheel’s flexibility. Additionally, the hub has a hexagonal hole, requiring another insert to have an axle-shaped hole, and if a team is using a low-strength axle, which is usually the case, the wheel...


 

Clip on keps

Auds1106

Its a clip on keps nut

Read more

VEX Caster Wheel

Shear_Braeden

This VEX Caster Wheel Designed by Jackson Stang, Brennan McCarthy, and Braeden Olewnik of team 6607A is Sweet Home High School's entry for the VEX robotics competition "Make It Real".

(I have Uploaded a PDF of our report but it is not showing in the Entrys. Heres the report just to be safe.)

                                           VEX Caster Wheel

       This is Team 6607A’s Entry for the 2020...



Adjustable Box Claw

cjperez1267

Adjustable Box Claw Explanation

We made this part to improve the functionality of a claw bot. We designed this mainly to expand upon the already existing functionality of a traditional claw. Using this part one may be able to have a modular claw that is mainly to be used for box shaped items. The claw can be used to have an adjustable distance, or a preset one for sturdier objects.

              When using this part with a bot, the user may replace the old claw part with the new one,...


"Make It Real" Challenge: C-Channel Angle

MGarbo

The inner side of a C-Channel often doesn't get much use, as parts often don't fit inside of the channel. With the C-Channel Angle, you can now attach other parts 90 degrees from the inner side of the C-Channel. The part also has 5 screw holes on each side of the angle, enabling more freedom for putting in screws. No longer are the days where the inside of the C-Channel receives little to no use.

Read more

 

The Aligner

70820X

Imagine it was a match in your regional competition that would make or break your chance to get to World’s. You put your robot on the field only to find that one of the wheels is not turning. Your alliance calls a timeout, and your team scrambles to fix it. Then, you realize that the locking collar fell off and the axle is out of the motor. But every time you slip on the locking collar, it twists and falls off. You finally get it on with seconds to spare, but you don’t have time to tighten the set screw. You run to your match in a panic! Our team faced this situation last...



The Omni-Directional Gear

QE-Barnet

In most robots I have seen, I have noticed a very heavy reliance on gears. In particular, a reliance on gears for the movement of parts that involve carrying or pushing an external object such as a ball or ring using the robot. I thought it would be more helpful for teams if they had a component that was capable of doing more than what a gear could do with less space and time consumed for many purposes. Hence, I have created the Omni-Directional Gear- a component that can move other VEX parts in a multitude of directions.  

Read more


The Mountable Wire Clip

vex99157

The Mountable Wire clip is an incredibly useful part for wire management. The clip can be attached to c-channels, angle bars, and other types of pieces. To insert or remove wires from the clip, simply slip the cable through the slot. While this part was designed for the new VEX Smart Cables, it can also work with the legacy cables.

Read more

Custom Angular Gear

aryancha7049

We are a high school robotics team that likes to be challenged and constantly use our minds to be creative and absorb knowledge. We would like to represent our school Metea Valley High School. We created a Custom Angular Gear to solve different problems in robotics.

Read more

36637A - Back Lock

MohamedAli

The problem began to appear in Tower Takeover 2019/2020 Mission in VEX Robotics Competition. Our robot had a manipulator, which was collecting the cubes from the field. Manipulators mechanism had to be inside the dimensions due to the limitation of robot dimensions at the competition. At the beginning of the match, the manipulator opens until it became in the front of the robot, using  the Rubber bands.

Last Year, while working on the Tower Takeover challenge, we faced a problem in the manipulator mechanism which was responsible for collecting cubes. The manipulator...


Renovated Mecanum Wheels

SPARK

Submission for the "Make It Real" CAD Engineering Challenge Sponsored by Autodesk® for vexU team SPARK from Austin, Texas.

Our report PDF is interactive, so if you click anywhere on the table of contents it will navigate you to that section.

We have also included a video to help with visualizing our assembly process.

Please feel free to comment with any questions you have and thank you for your time!

Read more

5327V's Shaved Bearing

gfr5327v

When building a robot, there are many times when a bearing is needed on the inside edge of a channel.  While putting on the bearing you realize you need a shaved bearing.  You can't find a good one, and are forced to make youre own.  While making your shaved bearing, you accidentally cut through one of the holes and have to restart, wasting both a bearing and your time.  If only VEX sold shaved bearings so you wouldn't have to shave them yourself.

Read more

V5 Gearbox Cartridge Adapter

Raider-Robotics

Introduction

The part we created for the Autodesk Make it Real Challenge is an adapter that allows for use of the V5 Motor Gearbox Inserts on mechanisms external to the motor. This allows for large gear ratios to be created in an extremely small space, enabling lighter and more compact mechanisms, as well as simplifying the process of creating geared mechanisms for new teams.

Design Explanation

The inspiration for our cartridge adapter comes from the VersaPlanetary, available in the VEXPro product line. During past seasons, we...


Wire Manager

msaravana23

We are a team that consists of 5 sophomore members from Michigan. As a team, we are passionate about what we can bring to the competition.

We created a wire manager to better manage wires on the robot.

Read more

Clip on Keps Nut

ironmechs2

Our team created the Clip on Keps Nut to make working in small spaces easier. This Keps nut also makes taking apart your robot simpler. Instead of unscrewing screws out of the regular Keps nut all you must do is pull the clip on Keps nut off of its screw.

Read more

Canine CareTaker

24calfonso

Introduction:

 

My submission for the AutoDesk “Make It Real” Engineering Challenge is the Vex Raspberry Pi Communicator. The Vex platform is amazing; the ease of use and reliability never cease to amaze me. The Raspberry Pi and its community offer networking, access to artificial intelligence software, and speech and voice recognition software, just to name a few potentials. I sought to create a part that would allow reliable communication between the two platforms. The result: a Vex Raspberry Pi communicator. Although the...


Integrated Adjustable Ratchet

HYBRID 20785A

Final Report: https://pdfhost.io/v/fvGUsrGBP_20785AFinalReportpdf.pdf

Version: Autodesk Inventor Professional 2021

We hope that you enjoy our project!

Read more

Structural Support

DeanParker

Structural Angle Support

 

My name is Dean Parker, and I have created a Diagonal Angle Support. A frequent problem when building towers or having 90° angles is support. It is nearly impossible to keep something 90° and it to be stable. However, this new piece has solved that problem. This support piece can be used to keep stability in a robot that is dealing with long c-channels being connected together. 

            Before I constructed it in CAD, I began measuring and sketching using a...



Clawbot Claw Rotator

drobertsSCS

This piece works for rotating the claw which allows the Clawbot to grasp more objects.

Read more

Helical Gears for VEX Robotics

4330X_RE

For our entry to the VEX Robotics "Make It Real" CAD challenge, we decided to design a set of helical gears that could easily be used in place of the stock VEX spur gears. These gears needed to use the same hub design as the stock gears so that they could fit in the same spaces and be mounted interchangeably. In addition to this they needed to have all the advantages that helical gears bring over spur gearing:

  • Lower backlash
  • Higher maximum loads
  • Smoother operation
  • Less wear

Although helical gears do...