Robotics Education & Competition Foundation
Online Challenges

Make It Real CAD Engineering Challenge, Sponsored by Autodesk ®

CONGRATULATIONS WINNERS FOR THIS SEASON’S CHALLENGE:

First Prize in overall challenge (Worlds Qualification), and Top Winner for VEX U category:

  • Team EFR Engineering Freaks from Toa Baja, Puerto Rico with “The VEX Two-Speed Transmission”

Second Prize in overall challenge, and Top Winner for VRC High School category:

  • Team 86868 THE RESISTANCE from Santa Clara, CA with “The Standoff Slide Truck”

Third Prize in overall challenge, and Top Winner for VRC Middle School category:

  • Team 9364D Iron Eagles from Brentwood, TN with “VEX License Plate Holster”

Winner of Bonus Prize (quadcopter) in the “Make” category

  • Team AURA Auckland University Robotics from Auckland, New Zealand with “AURA: Motor Attachment Blocks”

Congratulations everyone!!! Your entries these season were absolutely amazing, and you should be very proud of your work. We hope to see ALL of you entering again next season, and wish you the very best of luck and skill!

Don’t forget: All participants with eligible entries will be rewarded with a certificate for your portfolio and membership points in the Autodesk Education Expert Network, which allows you to showcase your work with industry professionals, among other benefits.

------

Have you ever wanted a particular component for your robot that was not included in the kit of parts? Do you want to design and make something unique that sets you apart from your peers? Then the “Make It Real CAD Engineering Challenge” is for you! Autodesk is sponsoring this challenge and giving you a chance to focus your passion for CAD and apply your skills to solve a real world design issue.

In this challenge, you will use the same Autodesk 3D design software used by professionals to conceptualize and model a new part for a robot that improves its functionality or overcomes an existing problem. The new part must be designed to fit an existing robot, and may consist of multiple pieces that form one part design. The robot may be a competition robot (VEX, FIRST, BEST, PLTW, SkillsUSA, TSA, etc.) or another robot that performs an interesting task. To make it even more exciting, you will also have the option to compete for a “bonus prize” by 3D printing your custom part! Note that your 3D printed part from this online challenge may be used in the VEX U competition, but not in VRC.

As a result of this challenge, you may just uncover the path to your destined career! You can sharpen or learn new skills, show off your talent, and build a portfolio that will give you an edge over peers when applying to universities or jobs. This is especially important as employers today are looking to hire new graduates with demonstrated experience and skills.

To help you succeed, access to Autodesk software is available at no charge to students. In the Make It Real CAD Engineering Challenge, you must use either Autodesk® Fusion 360™ or Autodesk® Inventor® to model your custom robot part. Whether you’ve used the software before or are brand new to CAD, the Autodesk Design Academy provides lessons and video tutorials for all skill levels. You can learn more about parametric, direct, and free form modeling on the Autodesk Design Academy web page created just for this challenge.

To get started, carefully read the complete challenge requirements on this page. Then visit the Autodesk Design Academy challenge page to download software, watch tutorials and learn how to create custom parts. When you’re ready, return to this page to submit your entry.

The future is yours to design, and we can’t wait to see how you change the world!

Finalists

High-strength lock bars

3547B

High strength lock bars are very useful in keeping gears from breaking in half, and keeping the hub from stripping out. The lock bar that I designed is made so that teams don’t have to us spacers to tighten the bolts without having to worry about bending the bar. Team Virus (3547) makes lock bars from vex one-bar by chopping them into 3, 5, and 7-hole high strength lock bars and sells them to teams all around the country. We have partnered with robosource to be able to sell them in Canada easily.

We make the lock bars by using a broach tool which is a rod that starts round,...


 

middle hole

jakub.nej.2022@brssd.org

A standart 36 tooth gear with a circular middle hole. This middle hole alows us to turn it into a differential or transfer multiple gear lines on one axel, which is also helpful. Lastly, you can use it to design a robot that is like a clawbot but can move it's claw up and down, seperate form the arm and on a motor that is attached to the 12*4 plate on the robot.

Read more

Autodesk team challenge Hook

coltonlwilliams

For the benfit of the compitition's challange of high hanging, we decided to design a hook which would complement our design. To hang, we needed to attach something light and simple that would provide enough friction to the pipe. A hook was the right design to complete the challenge. We made it long enough to reach the pipe and added a thredaded hole to extend the hook if needed. As well we chamfered the inside to give the hook a better grip. To attatch the hook me made a square hole with the same dimensions as the standard VEX parts.

Read more

Shaft Locking Peice

EagleEngineering1138

All information can be found in the PDF attached.

Read more

 

Pre-Made Slip Gear

AMendoza27

 

 

Since the introduction of our school's participation in this years vex robotics competition, most of our fellow teams have complained about the slip gear.

What is the problem with the part?

The main complaint with the part isn't its...


The VEX Two-Speed Transmission

Engineeringfreaks

Introduction

As time passes, the Vex Robotics Competition has gotten even more competitive. Do you need to collect scoring objects faster than your opponent? Do you need to push your opponent out of the way to score in your goal?

To dominate the field, a new weapon must be used: The Two-Speed Transmission. Using the Two-Speed Transmission, the output shaft can shift to the speed and torque that suits your needs in a competition...


New VEX Protractor

mostafabadro00@gmail.com

Introduction :

The Vex protractor is designed to provide an easy way to adjust the precise angle that I want, which help to build angular mechanisms by the protractor hand that I have designed.

You Can Download the Final Report so You Can Know More about the Protractor.

Read more


VEX Gear Shifter

omar8ahmed88

Hello!  We are ROBOTECH team and this is our entry to the 2017 REC Foundation Make It Real CAD Online Challenge.

Building a robot is on of the most exciting thing that you can do.
But what will happen if wanted a part that not included in the kit ?
You can design and print it ....
In the report you will see the new part that we designed for the make it real cad challenge...

 

Read more

VEX Electromagnet

judiviga

          TEAMS 

     4423C  4423D 

     4502G  4502H                                     ...
Read more


Filter